Lorawan network

New

DiWa 0101

LoRaWAN temperature and humidity sensor AN-103A AN-103A LoRaWAN Temperature and Humidity Sensor is a wireless temperature and humidity acquisition. It is designed for temperature and humidity monitoring and alarm. It comply with LoRaWAN standard communication protocol and integrates data acquisition and monitoring. With built-in temperature and humidity sensor chip, it has high detection accuracy, stable performance with low power consumption. It has long transmission distance and reliable signal output.

New

DiWa 0102

Smart Buildings & Home Automation Logistics and Supply Chain Management Smart Metering Smart Agriculture Smart Cities Smart Factory

New

DiWa 0103

The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x150A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.

New

DiWa 0104

The NETVOX Wireless Light Sensor and 3-Phase Current Meter with 3x630A Clamp-On CT is used to detect three-phase electrical input current and ambient light intensity detection. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.

New

DiWa 0105

Omni Directional Mounting support for pole or wall Extend 60cm N-Female to SMA plug cable.

New

DiWa 0106

• Embedded location stack (binary); • Gateway firmware, PC/Android app (in source code); This • Out-of-the-box scalable RTLS network solution; • Visualize and configure over Android/PC app; • Customize via APIs, re-flash boards over USB; • X-Y location accuracy: typically +/- 1 meter; • Receiver mode coverage range: 20 meters; and • Battery life: 6 hours, approximately. • Extension Power size: 74 x 154 x 33 mm

New

DiWa 0107

RAK7240

New

DiWa 0108

LHT65 LoRaWAN Temperature & Humidity Sensor

New

WL100L-F1131

WL100L-F1131 LaS 0131 Laser Sensors

New

DiWa 0121

LDS02 -- LoRaWAN Door Sensor

New

DiWa 0117

LSE01 -- LoRaWAN Soil Moisture & EC Sensor

New

DiWa 0118

LSN50v2-S31 -- LoRaWAN Temperature & Humidity Sensor

New

DiWa 0120

R718MA has a simple positioning function. The device reports its RSSI, SNR information periodically to the gateway. It can be attached to an object, and it sends an alert when it is removed from the premises. The communication is fully compatible with LoRaWAN™ protocol (Class A).

New

DiWa 0116

The device is a simple positioning function (which can detect the position status of the device), periodically reports RSSI and SNR information to the gateway for processing and can locate the position status of the device according to the reported RSSI and SNR information, and adopts SX1276 wireless communication module.

New

DiWa 0119

LDDS75 LoRaWAN Distance Detection Sensor

New

DiWa 0109

The R720B is a wireless communication device that detects ambient air temperature and humidity. The R720B also detects if it is being moved. The R720B can transmit the detected data to other devices via the wireless network, using the SX1276 wireless communication module.

New

DiWa 0110

The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.

New

DiWa 0111

R718N363 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested.

New

DiWa 0112

R718N315 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested.

New

DiWa 0113

R718N325-Wireless 3-Phase Current Meter with 3 x 250A Clamp-On CT

New

DiWa 0114

LHT52 indoor LoRaWAN Temperature & Humidity Sensor

New

DiWa 0115

LG308 Indoor LoRaWAN Gateway

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้